Finding and Sizing XAU/USD in the FxPro Terminal

Locating XAU/USD in the terminal

XAU/USD appears in the metals group of the Market Watch, not the forex group, which is why traders sometimes report it missing. In MT4 and MT5, right-click Market Watch, choose Symbols, and find the metals folder; in cTrader and FxPro Edge the instrument search box accepts XAU/USD directly. Add it to your watchlist so it stays visible.

Confirm the contract specification before you trade it, because gold is not bitcoin. The lot size, the pip definition and the margin requirement differ from BTC/USD, and leverage varies by instrument under the UAE cap of up to 1:500 on standard forex accounts. Read the specification window rather than assuming the bitcoin figures carry over.

Note the spread type on your account. Standard accounts trade on variable spreads with no commission; Raw+ and cTrader trade on raw spreads plus a per-lot commission. The cost structure is the same one you chose at sign-up, applied to a different instrument.

Sizing the order with the calculators

Size the position from the risk, not from the lot box. Decide the amount you are willing to lose if the stop is hit, then use the position size calculator to convert that into a lot figure at your stop distance. This is the step that keeps a gold trade from being three times the risk you intended, because gold's point value is larger than most traders assume.

Use the pip value calculator to see what one pip of movement is worth at your chosen size, and the margin calculator to see what the position ties up before you place it. Margin is not risk: a position can sit comfortably inside the margin requirement and still lose more than you planned if the stop is wide.

For a target, use the profit calculator to convert a price move into money at your size, so the reward is a number you have checked rather than a feeling about the chart. Do this before the order ticket opens, while you are still calm about the trade.

Setting the exit with the entry

Set the stop loss and take profit in the same order ticket as the entry, not after the position opens. Placing them together means the exit exists before the market can move against you, and it removes the moment where a losing trade is left open while you decide. In all four platforms the stop and limit fields sit on the order screen.

Set the stop at a level the chart justifies, then size the position to that stop rather than moving the stop to fit the size. If the resulting lot figure is smaller than you wanted, that is the calculator telling you the trade is too large for your risk budget, not a problem to solve by widening the stop.

Remember that gold CFDs are leveraged and can move sharply on news, and that a stop is not a guarantee of the fill price in a fast market. Trade the size the calculators give you, keep the exit attached to the entry, and treat the margin figure as a constraint rather than a target.

Why the platform lists more than one bitcoin symbol and how to confirm you have the right one

The platform shows several bitcoin symbols because it connects to multiple liquidity sources and account types, so the same underlying market can appear under different tickers. On FxPro's MT4, MT5, cTrader and FxPro Edge you may see BTC/USD alongside variants that differ by contract specification or execution model. The reliable way to confirm the right one is to open the symbol specification window and check that the instrument code is BTC/USD, the contract size is 1 BTC per lot, and the pip value is 1.0. If any of those differ, you are looking at a different product and your position sizing will be wrong.

The symbol you choose determines the contract size your order ticket applies, so picking the wrong listing quietly changes your exposure. A bitcoin position on a symbol where one lot equals 1 BTC behaves differently from a similarly named symbol with a different multiplier, even though the chart looks identical. Before placing any order, right-click the symbol, open its specification, and read the contract size field. On the correct BTC/USD listing it should state 1 BTC per standard lot. If it does not, switch to the listing that does, because every margin and pip calculation downstream depends on that single number.

Symbol availability can also differ between demo and live accounts, and between the desktop terminal and the mobile app, so a symbol you tested on demo may not appear in the same place on your funded account. If BTC/USD is missing from the Market Watch list, use the show-all-symbols option and search for bitcoin rather than scrolling. Once you have the correct listing, add it to your favourites so you are not re-selecting from a long list under time pressure. Confirm the specification once, then treat that saved symbol as the only one you trade for bitcoin.

What one standard lot of bitcoin actually represents on this platform

One standard lot of BTC/USD on this platform represents 1 bitcoin, not a fraction of it and not a basket. That contract size is the multiplier behind every number on your order ticket: the margin requirement, the pip value and the profit or loss on the position. With BTC/USD quoted near 77000.0, a 0.10-lot position is exposure to one tenth of a bitcoin, and a 1.00-lot position is exposure to one whole bitcoin. Reading the contract size as 1 BTC per lot is the single assumption that keeps the rest of your calculations honest.

Because one lot equals 1 BTC, the notional value of your position is simply the lot size multiplied by the bitcoin price, and the margin you post is a fraction of that notional set by the leverage cap. At the maximum available leverage of up to 1:500 on standard forex accounts, within DFSA/SCA-compliant limits, a 0.10-lot bitcoin position needs about $385.00 margin. That figure is a worked example of how the contract size and the leverage cap combine; change the lot size and the margin scales in proportion, but the 1 BTC contract size does not change.

The 1 BTC contract size also fixes what a pip is worth in cash terms, which is why the platform states a pip of 1.0 for this instrument. A one-point move in the BTC/USD price is one pip, and on a 1.00-lot position that move is worth the same as the price change in dollars; on a 0.10-lot position it is worth one tenth of that. Traders who assume bitcoin lots are sized like currency pairs, where one lot is 100,000 units, oversize their positions by orders of magnitude. Check the contract size field before you size anything.

Placing the stop-loss in the order ticket at entry instead of adding it afterwards

Attach the stop-loss in the order ticket at the moment you open the position, because a stop added after entry depends on you being at the screen when the market moves against you. On MT4, MT5, cTrader and FxPro Edge the order ticket has a stop-loss field next to the entry price, and filling it there sends the protective order to the server together with the entry. That removes the gap between being filled and being protected, which is exactly the window where an unplanned loss can grow. Decide the stop level before you click buy or sell, not after.

The stop level itself should be set from the chart structure and the position size, not from a round number that feels comfortable. Work backwards: decide the maximum you are willing to lose on the trade, then divide that amount by the pip value of your chosen lot size to get the distance in pips, and place the stop at that distance from entry. With a 0.10-lot BTC/USD position, each pip is worth a tenth of the price move, so a wider stop needs a smaller lot to keep the cash risk the same. The order ticket lets you set both before submission.

If you are entering at market and the price is moving quickly, the stop field in the ticket is still the right place to set protection, because it is submitted with the fill rather than typed in afterwards. Some traders prefer a pending order with the stop pre-attached for the same reason: the stop exists before the position does. Whichever route you use, verify the stop appears in the terminal's trade tab immediately after entry. A stop that exists only in your head is not a stop, and on bitcoin's price swings that distinction matters within minutes.

Reading the swap line on a bitcoin position you hold past the daily rollover

The swap line on your open bitcoin position shows the amount credited or debited when the position is held through the platform's daily rollover time, and it is separate from the spread and commission you paid at entry. On the trade tab it appears as a small positive or negative figure that updates each day the position remains open. For BTC/USD the swap reflects the cost of financing the notional exposure overnight, and because bitcoin is not a yield-bearing currency pair, the line is typically a charge rather than a credit. The exact amount depends on the broker's financing rate and your position size, not on a fixed number you can memorise.

The swap is calculated on the notional value of the position, so a 1.00-lot bitcoin position accrues a larger daily swap than a 0.10-lot position at the same price. That means the swap line scales with your exposure, and a trade held for several days can accumulate a financing cost that meaningfully changes the outcome even if the price returns to your entry. Before holding a bitcoin position overnight, check the swap figure shown in the symbol specification and multiply it by the number of days you expect to hold. If the expected move does not comfortably exceed that accumulated cost, the trade is not worth carrying.

The swap line also tells you when a position has been held through a rollover, which is useful for reconciling your account statement. If you see a debit you did not expect, compare the timestamp with the platform's rollover time rather than assuming an error. For UAE-based traders funding in AED through local bank transfer, the swap is applied in the account's base currency, so the line you see is already converted. Closing before rollover avoids the charge entirely, but it also means giving up any overnight move; that trade-off is a position-management decision, not a platform setting.

Confirming the bitcoin symbol's contract specification before you trade it

Open the symbol specification window before your first bitcoin trade and read three fields: the instrument code, the contract size and the pip value. On the correct BTC/USD listing the code is BTC/USD, the contract size is 1 BTC per lot and the pip is 1.0. Those three numbers are the foundation of every margin and risk calculation you will make on the position, and they are visible in the terminal without placing an order. If the specification shows a different contract size, you are on a variant listing and your sizing will be wrong from the first click.

The specification window also shows the swap rates and the trading sessions for that symbol, which tells you when the daily rollover occurs and what the financing charge looks like before you commit. Reading it once takes a minute and prevents the common error of assuming bitcoin lots are sized like forex lots. FxPro's platforms, including MT4, MT5, cTrader and FxPro Edge, all expose this window from the right-click menu on the symbol in Market Watch. Make it a habit before any new instrument, not just bitcoin.

The regulator context is worth knowing when you read the specification: the entity serving the UAE is FxPro Global Markets MENA Ltd., and FxPro is licensed by the FCA (UK), CySEC and FSCA. The maximum leverage shown for the symbol is a cap, not a target, and it varies by instrument within DFSA/SCA-compliant limits. Confirm the contract size and pip value first, then size the position against the margin the platform actually requires. The specification window is the authoritative source for those numbers on your account, so trust it over any general guide.

What the swap charge means for a multi-day bitcoin position and how to plan around it

A multi-day bitcoin position accumulates a swap charge at each daily rollover, and that charge is deducted from your account balance whether the trade is in profit or loss. Because the swap is based on the notional value, it grows with the lot size and with the number of days held, so a position opened at 1.00 lot costs more to carry than the same trade at 0.10 lot. Before deciding to hold through a weekend or a news event, check the swap rate in the symbol specification and estimate the total financing cost over your intended holding period. If the cost is large relative to your expected gain, the trade is a poor carry.

The swap line on the trade tab updates after each rollover, so you can watch the accumulated financing cost in real time rather than estimating it. That is useful for judging whether a trade that has moved sideways is still worth holding: if the price is flat but the swap is steadily negative, the position is losing ground even though the chart looks unchanged. For UAE traders whose account is funded in AED via local bank transfer, the swap appears in the account currency, so the figure you see is the amount that will affect your balance. There is no separate conversion step to worry about.

Planning around the swap means deciding your holding period before you enter, not after the first debit appears. If your reason for the trade is a short-term move, close before rollover and avoid the charge; if your reason is a multi-day view, size the position so the accumulated swap is a small fraction of your risk budget. The swap is one of the costs of trading bitcoin on margin, alongside the spread and any commission, and it belongs in your calculation from the start. The platform shows the rate; the decision to carry the position is yours.

Why the platform shows more than one bitcoin symbol and how to confirm the BTC/USD contract before you trade

The platform shows more than one bitcoin symbol because brokers list separate instruments for different account types, contract sizes and settlement currencies, so a symbol named BTC/USD may not be the same contract as BTCUSD. In FxPro's MT4, MT5, cTrader and FxPro Edge terminals, open the Market Watch or symbol list and check the contract specification panel: you need the bitcoin instrument where 1 lot equals 1 BTC and the pip is 1.0, quoted against USD. If the specification shows a different lot size or a different quote currency, you are looking at a different product and the margin and pip value you calculate will be wrong. Confirm the symbol name and specification before placing any order.

You confirm the right BTC/USD contract by matching three fields in the specification: the contract size must be 1 BTC per standard lot, the price reference should sit near the 77000.0 level given for this instrument, and the quote currency must be USD. The symbol description may also name the account type it belongs to, which matters because leverage is a cap, not a fixed setting, and varies by instrument; the UAE maximum is up to 1:500 on standard forex accounts within DFSA/SCA-compliant limits, and bitcoin may be treated differently. Do not assume every symbol labelled bitcoin uses the same contract size. Check each one you add to Market Watch, and keep only the BTC/USD line that matches the specification you intend to trade.

Several bitcoin symbols exist because the same underlying asset is packaged for different platforms and account structures. FxPro offers MT4, MT5, cTrader and FxPro Edge, and each can carry slightly different symbol naming even when the underlying contract is the same. The safe routine is to right-click the symbol, open Specification, and read the contract size, tick size and margin currency before you trade. If the contract size is not 1 BTC, the position you size will not match your plan. For UAE readers funding in AED, also check the margin currency shown, because margin and profit are converted, and that conversion depends on the account base currency you chose at registration.

What one standard lot of BTC/USD represents and how the contract size drives your margin and pip value

One standard lot of BTC/USD on this platform represents 1 bitcoin, and the pip is 1.0, so a one-point move in the price of bitcoin changes the value of a 1.00-lot position by 1 USD. That means a 0.10-lot position moves 0.10 USD per point. Because the reference price is near 77000.0, a 100-point move on a 0.10-lot position is about 10 USD. The contract size is the single number that converts your view into money, so confirm it in the specification before sizing. If you trade a symbol where 1 lot is not 1 BTC, every calculation below changes.

The contract size drives margin because margin is a percentage of notional value, and notional value is contract size multiplied by price and by lots. At the UAE maximum of up to 1:500 on standard forex accounts within DFSA/SCA-compliant limits, a 0.10-lot bitcoin position needs about $385.00 margin at the reference price near 77000.0. That figure is a worked example, not a promise: leverage varies by instrument and is a cap, not a target. Use the platform's margin calculator with the exact contract size shown in the specification, and remember that if your account base currency is AED, the margin requirement is converted, so the AED figure depends on the USD/AED rate at the time.

The contract size also sets pip value, and pip value is what lets you size a position to a risk amount rather than to a feeling. With 1 lot = 1 BTC and pip = 1.0, a stop 500 points away on 0.10 lots risks about 50 USD before costs. Decide the risk in AED or USD first, then divide by the point distance to get lots, and check the result against the margin the platform requires. Costs are separate from margin: the spread, any commission and the swap line are charged on top, and their size depends on market conditions and the instrument, so build them into the plan rather than assuming a number.

checked 2026-07-09 · https://www.dfsa.ae/public-register/firms/fxpro-global-markets-mena-limited